Cadillac Light Conversion Kits

88-98 Chevy/GMC Fleetside	97+ Ford F150	88-99 Chevy/GMC Dually
92-99 Suburban/Tahoe	97+ Dodge Dakota  (89-93 Caddy)	95-99 Tahoe  (94-96 Caddy)

 

INSTALLATION INSTRUCTIONS UNIVERSAL TAILLIGHT KIT 89-93 CADILLAC SEDAN DeVILLE TAILIGHTS PART#1378993 ACCESSORIES SOLD SEPARTELY: TAILLIGHT FILLERS (FOR SOME APPLICATIONS) TAILLIGHT ASSEMBY Part # 5975409 (x2) CHROME BEZELS Part # 16511372 (x2) BEZEL SCREWS Part # 22517337 (x4) (#8 x 1 _ö equivalent) For best results, please read all instructions thoroughly prior to attempting installation of your SIR MICHAEL'S Cadillac taillight kit. SIR MICHAEL'S recommends the use of approved hand, eye and ear safety equipment while performing this installation. If you have any questions concerning the installation of your SIR MICHAEL'S Cadillac taillight kit, please contact our customer service department at (714) 379-6800, Monday through Friday between the hours of 8:00 a.m. and 4:00 p.m. Pacific Standard Time (PST). NOTE: Any part that is modified and/or painted are non returnable. Install steel weld-on light fillers (if applicable) Position templates in desired location. Tack weld or screw to vehicle on both the top and bottom of template, making sure that the narrow end of the opening is toward the top. Cut out the opening of the template using a plasma cutter, cutting wheel, or equivalent. The sheet metal of the vehicle must match the template cutout as close as possible. (REMOVE TEMPLATES) Insert the taillight bucket into opening and position as desired. Make sure to place the bucket as level as possible so the light reflects straight back from the vehicle. You can adjust the depth of the taillight bucket based on your preference. Stitch weld the bucket into place. Repeat process for the other side. Cut and grind any excess material from buckets until it fits flush with the vehicle's body. Install the mounting clips to the top and bottom of each bucket by lining them up with the holes located in the buckets. Pre-install the taillight assemblies by inserting the assembly first, the bezel, and then screws. Using body work tools, fill any seams left on the buckets and prep for paint. Paint vehicle. Re-install the tailight assemblies.